G60-3電纜防火涂料

該產品采用過氯乙烯樹脂和氯化橡膠，添加阻燃劑、增塑劑等助劑，經研磨、混合而成。它受火膨脹形成致密的炭層，涂膜的物理、化學性能優異，阻燃性等效采用國際標準測試，達到A類要求，其各類環境氣候條件下應用性能穩定。適用于橡膠、聚乙烯、聚氯乙烯等各種電纜的防火保護。 

The product is polished and compounded through perchloro-ethylene resin and chlorinatedrubber and adding auxiliaries as fire retardant and plasticizer etc,which can expand to form charcoallayer through fire, physical and chemical properties of the coating is exceedingly good, with equivalentfire resistance of international standardized test up to A grade, and stable application under variousenvironmental weather conditions, which is suitable for fireproofing protection of various cables ofrubber, polyethylene and polrvinyl chloride etc.

施工方法：

1.先將被涂料電纜表面處理干燥、清潔，然后將攪拌均勻的涂料均勻涂刷在電纜上。

2.每次涂刷厚度為0.2-0.25mm為宜，直至達到規定設計厚度(一般1.0mm左右)。

3.開桶后未用完的涂料，應注意密封。

1.Surface of the painted cable should be making dry, clean in advance, painting the cable withcoating evenly.

2.The painting thickness each time should be better 0.2-0.25mm till the regulated design thickness(often about 1.0mm).

3.Left painting should be carefully sealed.

主要技術性能：